| Subject | Text |
| Oh..... yeah the problem... right.. lol
The screeching sound may or may not be related to the no |
| Not really. Did you replace all of the electrolytics around the verticle IC? Use quality high tempe |
|
|
| TOSHIBA CX2886/CX2885C | Thankyou very much for the guidance/tips. According to your tips i have checked/changed the suspecte |
| N3260w quits after awhile, cycling power brings it back | I have had a viewsonic N3260w for a couple years. It is used maybe 20 hours per week. About 6 mont |
| It is hard to know where to start. Does it make a sound like it is working hard or a light undervolt |
| C914 and C915 the culprits again | I have exactly the same monitor which had also gone completely blank with only a blinking blue light |
| I don't know your set. Get a service manual or a circuit diagram and replace all of the filter capac |
| Wonder if the screen display or it's back-lights working?
Try shining a battery flash light/torch |
| thanks for the reply. I looked at the electrolytic caps again and only one seems to have some minor |
| IGBT Cross Reference STGB10N50A | I'm trying to repair a voltage regulator that has a blown IGBT marked STGB10N50A. I have the datash |
| PX-50XM1 (50MP1) | All,
Just so you all know, below are the pcb labels from the scan board of the 2 capacitors which |
| Hitachi 50FX48B Shut Down Mode | Hitachi (1998) Model 50FX48B
TV will not power on. It is in Shut Down mode for protection.
The |
| If you get a diagram you can see what you are soldering:)
If not, replace the electrolytics around |
| Try it on 4 band and, AGAIN :roll:
Read (1st site) through more carefully ...
[quote:7ea57504 |